achieving electrical safety

general instructions

Personal protective equipments : insulated gloves, glasses, clothes, shoes, ... phone.

Safety equipments - workshop : signalling, poles and chains, fire extinguisher, ....

Tool 1000V.

• DC voltmeter.

identification

Model identification :

• Make.

• VIN.

• Type.

• The registration plate.

achieving proper work conditions

Check :

• Trouble code presence.

Switch ignition off.

Remove the ignition key.

Place the ignition key in a closed box.

Place the sign 'DO NOT START' on the steering wheel.

Disconnect :

• The battery. / battery negative terminal.

achieving electrical safety

In the cabin.

Remove :

• The clamp Ag.

• The covers Ga.

Let  => glide :

• The handle A.

Remove :

• The handle A.

checking that there is no voltage

In the motor compartment.

Remove :

• The screws B.

• The cover C of the housing of the current inverter.

With the help of a convenient 750V tool :

Check there is no voltage :

• Between the 1 and 2 pins.

End of the process.

general instructions

Personal protective equipments : insulated gloves, glasses, clothes, shoes, ... phone.

Safety equipments - workshop : signalling, poles and chains, fire extinguisher, ....

Tool 1000V.

• DC voltmeter.

identification

Model identification :

• Make.

• VIN.

• Type.

• The registration plate.

achieving proper work conditions

Check :

• Trouble code presence.

Switch ignition off.

Remove the ignition key.

Place the ignition key in a closed box.

Place the sign 'DO NOT START' on the steering wheel.

Disconnect :

• The battery. / battery negative terminal.

achieving electrical safety

In the trunk.

Remove :

• The trim of the rear floor.

• The clips A.

• The the boot floor B.

• The 4 nuts C.

• The covers D.

Let  => glide :

• The handle E.

Remove :

• The handle E.

checking that there is no voltage

In the motor compartment.

Remove :

• The screws B.

• The cover C of the housing of the current inverter.

With the help of a convenient 750V tool :

Check there is no voltage :

• Between the 1 and 2 pins.

End of the process.